Sinclairity | Norsat International Inc

Tags: Sinclairity

Sinclairity eNewsletter – September 2017

It’s been a big year for the public safety industry! With the launch of FirstNet, and the proposed deployment of the nationwide public safety broadband network (NPSBN) in the U.S, it’s been the year of announcements. Hence, we’re dedicating this edition of Sinclairity to public safety communications and to all those who work in the public safety sector. Thank you for everything you do!

FEATURED PRODUCT

SE41X-SWB Series: Wideband PIM-Certified Enclosed Dipole

One wideband antenna for your 700, 800, 900 MHz systems. Sinclair’s SE41x-SWB series of enclosed dipole arrays offer stable performance over the entire 746-960 MHz bandwidth in a single antenna.

-Highly versatile antennas for trunked radio, paging, and data transmission

-Designed for multi-channel systems

-500 W PIP-rated

-Low passive intermodulation design

-High average power rating

-Horizontal beamwidth adjustable from 60° to 160°

DOWNLOAD THE SPEC SHEET

TXC Series: Ultra High Q Ceramic Transmitter Combiner

This compact 1-12 channel transmitter combiner provides excellent performance while conserving valuable rack space.

  • Available in 700 and 800 MHz bands
  • 1-12 channel configurations available
  • 3U rack spacing per 3 channels
  • Field tunable
  • Typical insertion loss 1.7 dB
  • Frequency separation as low as 0.15 MHz
  • Stable performance over wide temperature range

DOWNLOAD THE SPEC SHEET

CASE STUDIES/TECHNICAL INFORMATION 

WHITE PAPER: A Guide to Basic Types of Cavity Combiners

In order to understand how cavity combiners operate, it is important to have an approximate idea of how cavities and transmission lines work. This white paper describes different types of cavities and provides a basic summary of how cavity combiners create paths for multiple signals to reach a single antenna with minimum interference between them. DOWNLOAD THE WHITE PAPER

 

CASE STUDY: Custom Duplexer Designed for Law Enforcement Off Road Vehicle Fleet 

Access to reliable communication equipment is essential for law enforcement agencies where a short response time is critical in what could be a life or death scenario. Sinclair Technologies understands that reliability is always a major consideration in the design process for public safety products. A key law enforcement agency presented a requirement for a high-performance, ruggedized duplexer to operate in a challenging on and off road environment, with exceptionally wide temperature swings and very compact space constraints. DOWNLOAD THE CASE STUDY

WHITE PAPER: Introduction to Filtering for Radio Signals

A practical and helpful whitepaper on filtering radio signals is now available for free to download on IWCE’s Urgent Communications website. This white paper addresses the basic techniques on how to properly filter as it applies to the transmission and reception of radio signals. As well, it offers descriptions of different types of filters, what they do, and why they are used. DOWNLOAD THE WHITE PAPER

 

TRADE SHOW/EVENT HIGHLIGHTS

Sinclair On-Board with Railway Interchange 2017

As a member of Railway Interchange, RSSI teamed up with two other associations, REMSA and RSI, to put together a bigger and better exhibition. AREMA also held its conference and seminars in conjunction with Railway Interchange. It was triple the size and triple the excitement that attracted all types of visitors from railroad, rail transit, and government. Sinclair Technologies took part in the trade show with a wide range of railway antennas and filters on display. READ MORE ON RSSI

APCO International 2017: Bringing the Public Safety Industry Together

APCO International’s Annual Conference & Expo was hosted in Denver, Colorado and offered four days of educational sessions and amazing keynote speakers including General Keith Alexander, Colonel Jill Morgenthaler, and Scott O’Grady. There were over 100 educational sessions and nine session tracks including Emergency Preparedness, Response & Situational Awareness. NG9-1-1 & Emerging Technologies, Communications Center Management, and Industry Products & Tools. The event was mainly attended by communication officers and managers of Police, Fire, and EMT personnel for state and local public safety entities. READ MORE ON APCO INTERNATIONAL

Sinclair Two-Day Technical Workshop: Expertise at Your Fingertips

Sinclair had a successful two-day workshop at its Aurora office! The two-day workshop was broken into “Antennas and Antenna Theory” for day one and “RF Filter Products and Accessories” for day two. The workshop was hosted by Sinclair’s Technical Engineers, Jim Reville and Mike Macki. The workshop offered valuable hands-on training, as well as a Q&A with Sinclair Engineers. Overall, the event was very well received with attendees requesting additional workshops with more in-depth information.

CORPORATE WEBINAR TRAINING

UPCOMING SHOWS

Event Date: Nov. 6-9, 2017
Event Location: Windsor, Ontario
Booth Number: 307

Sinclair will be attending APCO Canada in Windsor, Ontario. We will be showcasing our newest products for public safety. Come by booth #307 and say hi to Martine and Michel! Click here to book your appointment with a Sinclair sales representative.

Attend the 3-day conference at a discounted price of $450 CAD! How? Register under “Referral Program”, enter the access code STW100 and select Sinclair Technologies as the exhibitor that referred you! We hope to see you there! REGISTER FOR THE CONFERENCE AND TRADESHOW

Only want access to the tradeshow floor? Upon registering, use promo code APCOExhibitor for your complimentary ticket to the tradeshow floor, courtesy of Sinclair Technologies. Don’t forget to drop by booth #307. REGISTER FOR THE TRADESHOW ONLY

Sinclairity eNewsletter – June 2017

Technical experience doesn’t come overnight. Sinclair has been in the antenna design and manufacturing business for over 60 years and has seen just about everything when it comes to antennas and RF filter products. Our technical expertise, product reliability, and customer service are what keeps our customers coming back. So in this issue of Sinclairity, we focused on providing you with technical articles and case studies where we went above and beyond for our customers. We are excited to design and build products to meet the unique challenges that our customers face. Thank you for reading our Sinclairity newsletter and as always, if you have any questions, we are happy to help!

FEATURED PRODUCT

SM701 Series Transportation Antenna

Sinclair’s SM701 series of transportation antennas are specifically designed to address the need for compact, low profile, broadband antennas used in a harsh environment. The antenna provides excellent performance with or without a ground plane, which provides a truly universal solution. The SM701 antennas can serve multiple radio systems operating at different frequencies at the same time with the addition of a crossband coupler expansion kit. This antenna comes with a 1’ pigtail on the RF antenna port and the GPS port comes with a 16.4’ pigtail. To learn more about the SM701, click here.

CASE STUDIES/TECHNICAL INFORMATION 

TECHNICAL WORKSHOP: Sinclair Offering Complimentary Two-Day Workshop on Antennas and RF Filter Products

We are offering a complimentary two-day technical workshops at the Sinclair office and factory at 85 Mary Street in Aurora, Ontario (click for directions). The workshops is two full days and will take place on June 28 and 29 from 8:30AM-3:30PM.

Wednesday June 28, 2017 – PART I: Antennas and Antenna Theory

Thursday June 29, 2017 – Part II: RF Filter Products and Accessories

The enhanced 2017 training will cover:

  • All aspects of antenna and RF filter products
  • Demonstrations on how to test and tune filter products
  • Discussions with technical experts and a Q&A

CASE STUDY: Custom Duplexer Designed for Law Enforcement Off Road Vehicle Fleet 

Access to reliable communication equipment is essential for law enforcement agencies where a short response time is critical in what could be a life or death scenario. Sinclair Technologies understands that reliability is always a major consideration in the design process for public safety products. A key law enforcement agency presented a requirement for a high-performance, ruggedized duplexer to operate in a challenging on and off road environment within very compact space constraints.Click here to read the case study.

CASE STUDY: Radiometrics Partners with Sinclair Technologies to Design Custom Antenna

Radiometrics (through its recently acquired DeTect Meteorological Systems Group) was selected to replace the aging troposphere/stratosphere Radar Wind Profiler (RWP) system at NASA Kennedy Space Center. At the time, NASA was utilizing weather balloons to determine winds aloft, and loosely relying on their old RWP system as a backup. NASA heavy-lift community’s interest in precise, current winds spurred the need for the new RWP system. This replacement project is expected to last for the next 20 years. Click here to read the case study.

CASE STUDY: Sinclair Helps NAV Canada Safely Move Millions of Aircraft

NAV CANADA’s radar coverage of Hudson Bay was limited to line-of-sight (LOS) and did not cover the entire Hudson Bay area. The Company used VHF communication sites around Hudson Bay and HF communications for areas that were not covered by VHF. During a testing phase, the system produced a result that was less than expected as the coverage was effected by ice buildup on the antenna. Sinclair Technologies was approached to provide a high gain antenna that would be able to withstand ice buildup and to provide the needed coverage. Click here to read the case study.

VIDEO: How to Tune a TXC Combiner

In this video, Sinclair Technologies Engineer, Mike Macki details the steps to tune a Combiner from the TXC family of Products.

Mike shows you the tools and the proper process to accurately tune step by step a Combiner and you can see simultaneously the results on the Network Analyzer. Click here to view this video on YouTube

BLOG POSTS
Antenna Installation and Clamps

Antennas are sensitive pieces of equipment and can be easily damaged if installed incorrectly. If the antenna is not installed correctly, the antenna can shift position which can result in poor performance, excessive vibration, and material fatigue. The antenna should be straight and mounted in a sturdy fashion; it should have minimal movement and should stay as still as possible. The source of a reduced coverage area could be a result of several factors, but it is important to first look at how the antenna was installed and the clamps used. Click here to read the blog post.

Photo Contest Winner Announced

Congratulations to Ron McFadyen, President of the Yukon Amateur Radio Association for winning Sinclair’s photo contest! This photo was taken on Mount Decoli, near the Haines Junction in Yukon, Canada. Thanks Ron for the great photo and your $100 Amazon gift card is on its way.

We received some amazing photos and we would like to thank everyone who participated.Thank you for supporting Sinclair products and for taking the time to enter our photo contest!

TRADE SHOW HIGHLIGHTS

Sinclair Displays Top Products at Critical Communications World in Hong Kong

Hong Kong is the epicenter of thriving new technology and innovation. It was a great location for Critical Communications World (CCW) and attracted attendees from all over the world. With over 175+ exhibitors, Sinclair Technologies exhibited at CCW with their Hong Kong partner, Telegence (Asia). Read the full blog post by clicking here.

 

Sinclair Actively Supports USA Distribution Partner, Talley

It’s clear that Sinclair Technologies have been keeping themselves busy attending trade show after trade show…after trade show. Recently, Sinclair participated at the Talley Atlanta Open House and hosted a technical seminar at the Talley – Phoenix location! Talley is a fantastic partner of Sinclair’s and it was great to be able to participate in these awesome events. Read the full blog post by clicking here.

On the Road at UTC Telecom & Technology Show

Another trade show in the books! Sinclair Technologies exhibited at the UTC Telecom & Technology trade show in Charlotte, North Carolina. Both Sal (Director of Sales, USA) and Cyndi (Western Sales Manager, USA) attended the show and said that it was a good event with lots of great energy. Read the full blog post by clicking here.

Sinclair Showcases at TESSCO ONE Open House

The two-day show was put on by our excellent partner TESSCO and included an exhibition floor, knowledge sessions, and keynote speakers. Thousands of wireless industry professionals gathered together for this event as it was a great opportunity to network and to learn about the latest developments in wireless technology. The show was very busy for our US Director of Sales and Marketing, Sal Farina, as he was constantly meeting direct customers and resellers. Overall, it was a successful show and we look forward to participating again in 2018 in Charleston, NC. Read the full blog post by clicking here.

Upcoming Shows

Sinclair Technical Workshop

Event Date: Jun. 28-29, 2017
Event Location: Aurora, ON

APCO USA

Event Date: Aug. 13-16, 2017
Event Location: Denver, CO
Booth Number: 1633

RRSI Railway Interchange

Event Date: Sep 17-20, 2017
Event Location: Indianapolis, IN
Booth Number: 2518

APCO Canada

Event Date: Nov. 6-9, 2017
Event Location: Windsor, Ontario
Booth Number: TBA

Click here to see the full list of upcoming trade shows.

Sinclairity Newsletter – Dec 2016

Posted on Wednesday, December 21

Tags: , ,

In this issue: Intro | Product Spotlight | Highlights | Technical Training | Events

christmas_cards_2016-sinclair-englishIt has been a busy and successful year for the team at Sinclair Technologies. With 2016 coming to a close, we want to thank all of our customers for your continued business and wish you a wonderful holiday season and all the best for 2017!
The Sinclair Team

Product Spotlights

SC432D

sc432dKey Features:

• Collinear omni, 2 ports, heavy duty, low PIM, 2 band splits to cover the entire 746 – 960 MHz range
• Dual collinear antennas with typical 0, 3 or 6 dBd gain and 0 – 10 degrees of downtilt
• 1.5:1 VSWR to provide excellent coverage
• Designed to operate in extreme environmental conditions
• Provides 40/45 dB port-to-port isolation, PIP option is available

Product Description
Sinclair’s new line of high isolation dual port antennas, the SC432D’s are collinear, omni-directional antennas are available with various gains (0, 3, and 6 dBd), and are also available with different port-to-port isolations, depending on the gains. These dual antennas are all enclosed in the same radome, requiring less tower space than two individual ones. For more information click here.

SC432T

sc432t

 

Key Features:

• Collinear omni, 3 ports, low PIM, 2 band splits to cover the entire 746 – 960 MHz range
• Triple collinear antenna with typical 0 or 6 dBd gain, with multiple downtilt options
• 1.5:1 VSWR to provide excellent coverage
• Designed to operate in extreme environmental conditions
• Provides 30/45 dB port-to-port isolation, PIP option is available

Product Description
Sinclair’s new line of high isolation triple port antennas, the SC432T series of collinear, omni-directional antennas are available with 0 or 6 dBd gain, all within the same radome. All SC432T’s are enclosed in a rugged, UV protected fiberglass radome designed to withstand severe wind and ice conditions. For more information click here.

Highlights

Sinclair Wins the 2016 Best Remote Data Transmission Products Provider in Canada
Sinclair Technologies won the 2016 Best Remote Data Transmission Products Provider in Canada from TMT (Technology. Media. Telecoms.). TMT News offers the latest information from technology, media and telecoms sectors exploring every aspect, from legislation changes to the latest deals and new product launches.

Sinclair won this award because they offer new, cutting-edge technology antennas, RF conditioning products and customized filter systems. One of the featured mobile antenna series for remote and real-time data transmission is the SM Series of multi-functional transport antennas. Read More

Technical Training

New Sinclair Video: How To Tune A Ceramic Combiner
Do you know how easy it is to tune a TXC Ceramic Combiner?  Mike Macki, Senior Product Design Engineer at Sinclair Technologies details the steps to tune a Combiner from the TXC family of products. Mike shows you how easy the Combiner can be tuned when you compare it to other products of the same kind. What makes our Combiner stand out is that the tuning rods can be simply adjusted with your fingers, and not with a wrench.  This cuts the tuning time by more than half and response is much better in term of insertion loss.  Click here to go to our YouTube Video and learn more!

txc_tuning_video_image

IWCE Presentation
Sinclair’s Jim Reville, RF Engineer has been selected to present on a panel at IWCE. Come learn valuable information on infrastructure, system planning, next-generation networks, broadband, hardware, applications, spectrum optimization and interoperability.

Tuesday, March 28
8:30 am – 11:30 am
Room T215
Smart Cities & CI Track
Network Capacity and Densification

Events

logoThe Association of Public-Safety Communications Officials (APCO) Canada show held recently in Banff, Alberta is where key players from the Canadian Public Safety Sector gather annually to discuss their successes, concerns and action plans. This is also the opportunity for manufacturers  and OEM’s to reach out and share information about their latest technologies.

pic1Sinclair was pleased to feature the new SC251D VHF Dual Antenna that was the center piece of our display, along with the new wideband Yagi.  There was huge interest from potential users of the dual antenna as this is a way to reduce tower loading, as well as achieving excellent port-to-port antenna isolation.

For more information on these products, as well as Sinclair’s other leading RF antennas and conditioning products go to www.sinctech.com

Upcoming Shows

iw17-logo-tagline-black-blueIWCE 2017
Booth – 1528
March 29-30
Las Vegas, NV

Contact a Sales Agent

image description

We're here to help.

Subscribe to Norsat News



Events

  • IWCE 2018

    Mar 05 - 06, 2018

    Orlando, FL

    Visit us at booth #1935