KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.80 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±2 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1350 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.7 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.90 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±2 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1250 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.8 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.00 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±2 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1150 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.9 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.10 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±2 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1050 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 4.0 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.80 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±2 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1350 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.7 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.90 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±2 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1250 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.8 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.00 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±2 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1150 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.9 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.10 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±2 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1050 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 4.0 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.80 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±10 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1350 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.7 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.90 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±10 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1250 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.8 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.00 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±10 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1150 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.9 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.10 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±10 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1050 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 4.0 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.80 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±10 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1350 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.7 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.90 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±10 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1250 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.8 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.00 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1150 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.9 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.10 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1050 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 4.0 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.80 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1350 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.7 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.90 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1250 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.8 GHz and > 4.8 GHz with no degradation |
Product Revision | C |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.00 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1150 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.9 GHz and > 4.8 GHz with no degradation |
Product Revision | C |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.10 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1050 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 4.0 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.80 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1350 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.7 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.90 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1250 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.8 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.00 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1150 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.9 GHz and > 4.8 GHz with no degradation |
Product Revision | C |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.10 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±25 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1050 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 4.0 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.80 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±100 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1350 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.7 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.90 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±100 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1250 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.8 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.00 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±100 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1150 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.9 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.10 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±100 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1050 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 4.0 GHz and > 4.8 GHz with no degradation |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.80 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±100 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1350 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.7 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 3.90 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±100 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1250 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.8 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.00 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±100 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1150 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 3.9 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
KEY SPECIFICATIONS | |
---|---|
band | C-Band |
input frequency band 1 | 3.40 - 4.20 GHz |
input frequency band 2 | 4.10 - 4.20 GHz |
LO frequency 1 | 5.15 GHz |
LO frequency 2 | 5.15 GHz |
LO stability | ±100 kHz |
LO type | PLL |
noise figure max | 60K |
noise figure typ | 37K |
number of onboard LOs | Dual-Band |
output frequency band 1 | 950 - 1750 MHz |
output frequency band 2 | 950 - 1050 MHz |
rejection 1 (-25dBm interface signal) | No rejection |
rejection 2 (-25dBm interface signal) | < 4.0 GHz and > 4.8 GHz with no degradation |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 70 dB |
conversion gain min | 55 dB |
conversion gain typ | 60 dB |
Gain Flatness (over full band) | ≤ 6 dB p-p max. |
input VSWR | 2.2 : 1 max. |
output P1dB | + 9 dBm min. |
output VSWR | 2.5 : 1 max. |
phase noise 1kHz offset max | -80 dBc/Hz |
phase noise 10kHz offset max | -85 dBc/Hz |
phase noise 100kHz offset max | -95 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA max. |
power requirements | +12 to +24V DC |
switching voltage 1 | 13V |
switching voltage 2 | 18V |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector (waterproof) |
RF input connector | WR-229 waveguide grooved (waterproof) |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 66 |
temperature operational | -40°C to +60°C |
temperature storage | -50 to +70°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 69.85 mm |
product length | 159 mm |
product weight | 0.5 kg |
product width | 98.55 mm |
Please contact us to request any additional documents you may need.
INFORMATION | |
---|---|
HS Code | 8517690000 |
Country of Origin | Made in Canada |
Ex Works | Richmond, BC, Canada |
ECCN Number | EAR99 |
Warranty | 3 years |
Unit Package Dimensions | 170 mm x 115 mm x 75 mm |
Unit Package Weight | 0.56 kg |
Aluminium Content | 0.45 Kg |
Aluminium COO | Made in Canada |
Aluminium Total Value | $ 1.125 |