KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | F Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 17.20 - 18.20 GHz |
input frequency band 2 | 18.20 - 19.20 GHz |
LO frequency 1 | 16.25 GHz |
LO frequency 2 | 17.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | F Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | F Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 17.20 - 18.20 GHz |
input frequency band 2 | 18.20 - 19.20 GHz |
LO frequency 1 | 16.25 GHz |
LO frequency 2 | 17.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | F Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | N Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 17.20 - 18.20 GHz |
input frequency band 2 | 18.20 - 19.20 GHz |
LO frequency 1 | 16.25 GHz |
LO frequency 2 | 17.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | N Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | SMA Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 17.20 - 18.20 GHz |
input frequency band 2 | 18.20 - 19.20 GHz |
LO frequency 1 | 16.25 GHz |
LO frequency 2 | 17.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | SMA Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | N Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 17.20 - 18.20 GHz |
input frequency band 2 | 18.20 - 19.20 GHz |
LO frequency 1 | 16.25 GHz |
LO frequency 2 | 17.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | N Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | SMA Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 17.20 - 18.20 GHz |
input frequency band 2 | 18.20 - 19.20 GHz |
LO frequency 1 | 16.25 GHz |
LO frequency 2 | 17.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | SMA Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | F Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 18.20 - 19.20 GHz |
input frequency band 2 | 19.20 - 20.20 GHz |
LO frequency 1 | 17.25 GHz |
LO frequency 2 | 18.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | F Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | F Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 18.20 - 19.20 GHz |
input frequency band 2 | 19.20 - 20.20 GHz |
LO frequency 1 | 17.25 GHz |
LO frequency 2 | 18.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | F Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | N Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 18.20 - 19.20 GHz |
input frequency band 2 | 19.20 - 20.20 GHz |
LO frequency 1 | 17.25 GHz |
LO frequency 2 | 18.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | N Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | SMA Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 18.20 - 19.20 GHz |
input frequency band 2 | 19.20 - 20.20 GHz |
LO frequency 1 | 17.25 GHz |
LO frequency 2 | 18.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | SMA Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | N Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 18.20 - 19.20 GHz |
input frequency band 2 | 19.20 - 20.20 GHz |
LO frequency 1 | 17.25 GHz |
LO frequency 2 | 18.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | N Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | SMA Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 18.20 - 19.20 GHz |
input frequency band 2 | 19.20 - 20.20 GHz |
LO frequency 1 | 17.25 GHz |
LO frequency 2 | 18.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | SMA Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | F Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 19.20 - 20.20 GHz |
input frequency band 2 | 20.20 - 21.20 GHz |
LO frequency 1 | 18.25 GHz |
LO frequency 2 | 19.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | F Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | F Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 19.20 - 20.20 GHz |
input frequency band 2 | 20.20 - 21.20 GHz |
LO frequency 1 | 18.25 GHz |
LO frequency 2 | 19.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 0.1kHz offset max | Depends on External Reference |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | F Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | N Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 19.20 - 20.20 GHz |
input frequency band 2 | 20.20 - 21.20 GHz |
LO frequency 1 | 18.25 GHz |
LO frequency 2 | 19.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | N Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | SMA Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 19.20 - 20.20 GHz |
input frequency band 2 | 20.20 - 21.20 GHz |
LO frequency 1 | 18.25 GHz |
LO frequency 2 | 19.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | SMA Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | N Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 19.20 - 20.20 GHz |
input frequency band 2 | 20.20 - 21.20 GHz |
LO frequency 1 | 18.25 GHz |
LO frequency 2 | 19.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | N Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | SMA Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 19.20 - 20.20 GHz |
input frequency band 2 | 20.20 - 21.20 GHz |
LO frequency 1 | 18.25 GHz |
LO frequency 2 | 19.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | SMA Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | F Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 20.20 - 21.20 GHz |
input frequency band 2 | 21.20 - 22.20 GHz |
LO frequency 1 | 19.25 GHz |
LO frequency 2 | 20.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | F Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | F Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 20.20 - 21.20 GHz |
input frequency band 2 | 21.20 - 22.20 GHz |
LO frequency 1 | 19.25 GHz |
LO frequency 2 | 20.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | F Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | N Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 20.20 - 21.20 GHz |
input frequency band 2 | 21.20 - 22.20 GHz |
LO frequency 1 | 19.25 GHz |
LO frequency 2 | 20.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | N Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | SMA Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 20.20 - 21.20 GHz |
input frequency band 2 | 21.20 - 22.20 GHz |
LO frequency 1 | 19.25 GHz |
LO frequency 2 | 20.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.7 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 1.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | SMA Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA Connector |
isolator | With Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | N Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 20.20 - 21.20 GHz |
input frequency band 2 | 21.20 - 22.20 GHz |
LO frequency 1 | 19.25 GHz |
LO frequency 2 | 20.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | N Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N-Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external input port | SMA Connector |
external ref freq | 10MHz, -5 to +5dBm |
input frequency band 1 | 20.20 - 21.20 GHz |
input frequency band 2 | 21.20 - 22.20 GHz |
LO frequency 1 | 19.25 GHz |
LO frequency 2 | 20.25 GHz |
LO stability | Ext Ref |
LO type | PLL |
noise figure max | 1.8 dB |
number of onboard LOs | Simultaneous Dual Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
conversion gain max | 65 dB |
conversion gain min | 55dB |
conversion gain typ | 60 dB |
Gain Flatness (Over Any 36MHz) | 1 dB p-p |
Gain Flatness (over full band) | 4 dB p-p |
image rejection | 40 dBc min. |
input VSWR | 2.5 : 1 max. |
output P1dB | 5 dBm min. |
output VSWR | 2.2 : 1 max. |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 350 mA max. (each band) |
IF connector | SMA Connector |
power requirements | +12 to +24V DC (each band) |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA Connector |
isolator | No Isolator |
RF input connector | WR 42 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 159.2 mm |
product length | 38.4 mm |
product weight | 0.75 kg |
product width | 78.4 mm |
Please contact us to request any additional documents you may need.
INFORMATION | |
---|---|
HS Code | 8517690000 |
Country of Origin | Made in Korea |
Ex Works | Richmond, BC, Canada |
ECCN Number | EAR99 |
Warranty | 3 years |
Unit Package Dimensions | 160 mm x 80 mm x 40 mm |
Unit Package Weight | 0.75 kg |