MEDIAN 50W X-Band GaAs BUC (DC + INT Ref High Stability)
MEDIAN 50W X-Band GaAs BUC (DC + INT Ref High Stability)

MEDIBX050DS-XN-S

MEDIAN 50W X-Band GaAs BUC (DC + INT Ref High Stability)

MEDIBX050 Series

Precio habitual
$21,247.06
/
Quantity Available: 0
Next Availability: Not Applicable
Next Availability Lead Time: Contact Sales
Ex Works: Richmond, BC, Canada

View Resellers Quantity

(Scroll to see specifications and documents)


0 en stock



For the X-Band Median BUC, a receive reject filter must be purchased as an add-on accessory unless:
1) you are using a Tx-only antenna and do not require the receive function; or
2) your terminal already includes embedded filters. The receive reject filter is sold separately at an additional cost.

KEY SPECIFICATIONS
band X-Band
frequency sense Non-Inverting
input frequency band 1 950 - 1450 MHz
number of onboard LOs Single-Band
output frequency band 1 7.900 - 8.400 GHz
output power rated 50W
product family MEDIAN
reference type Internal High Stability
Product Revision A
RF SPECIFICATIONS
AM-PM conversion < 3.0 deg/dB @ Rated Power
attenuator range 30 dB variable in 0.1 dB steps
gain flatness (1MHz) 0.25 dB p-p max
gain flatness (36MHz) 1 dB p-p max
gain flatness (over full band) 3 dB p-p max
gain variation over temperature (open loop) 3 dB p-p max
gain variation over temperature (witg AGC) 1 dB p-p max
gain version Std (X-Band) unit with Multicarrier compatibility only
group delay linear 0.03 ns/MHz
group delay parabolic 0.003 ns/MHz²
group delay ripple 1 ns p-p Over Any 36 MHz
harmonics -60 dBc max
IMD3 -27 dBc max
input impedance 50 Ohm
input power detector range -55 to -20 dBm
input VSWR 1.5 : 1
Level Stability with ALC ± 0.5 dB
mute -70 dBc Max.
output noise power density Rx < -79 dBm/Hz (w/o RX Reject Filer)
output noise power density Tx < -79 dBm/Hz
output P1dB +47 dBm min
output Plin 46 dBm
output spurious in band -65 dBc
output spurious out of band Complies with MIL STD 188-164C
output VSWR 1.5 : 1 max
small signal gain 78 dB min
ELECTRICAL SPECIFICATIONS
current consumption 350W
output power detector range Rated Power to -20 dB
power reading accuracy ± 1.0 max
power requirements 48 ± 11 VDC
power supply DC Powered, No Power Thru Coax, 48 ± 11 VDC
INTERFACE SPECIFICATIONS
IF connector N
M and C option Standard M&C
output connector CPR-112G
ENVIRONMENTAL SPECIFICATIONS
altitude 10,000 ft (3,000 m) ASL
humidity 100% Condensing
temperature operational -40°C to +55°C
PHYSICAL SPECIFICATIONS
product dimensions (LxWxH) 267 x 152 x 145 mm
product weight 5.2 kg