| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1950 MHz |
| LO frequency 1 | 28.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 16W |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 70 dB |
| linear gain min | 60 dB |
| linear gain typ | 65 dB |
| linear power plin | 39 dBm min. |
| noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| output P1dB | 42 dBm min. |
| output power psat | 42 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -55 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -73 dBc/Hz |
| phase noise 1kHz offset max | -73 dBc/Hz |
| phase noise 10kHz offset max | -83 dBc/Hz |
| phase noise 100kHz offset max | -93 dBc/Hz |
| phase noise 1000kHz offset max | -103 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 4.8A Max at 28 V DC |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12-4P |
| power consumption | 140W max. |
| power requirements | +28 to +72V DC |
| protection rating | IP55 |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 8 - 100% condensing |
| IP rating | IP 66 |
| temperature operational | -40°C to +60°C |
| temperature storage | -50 to +70°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| product height | 78 mm |
| product length | 168 mm |
| product weight | 1.5 kg |
| product width | 108 mm |
| ACCESSORIES | |
|---|---|
| db9 to usb adaptor | USB-RS485 |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1950 MHz |
| LO frequency 1 | 28.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 16W |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 70 dB |
| linear gain min | 60 dB |
| linear gain typ | 65 dB |
| linear power plin | 39 dBm min. |
| noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| output P1dB | 42 dBm min. |
| output power psat | 42 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -55 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -73 dBc/Hz |
| phase noise 1kHz offset max | -73 dBc/Hz |
| phase noise 10kHz offset max | -83 dBc/Hz |
| phase noise 100kHz offset max | -93 dBc/Hz |
| phase noise 1000kHz offset max | -103 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 4.8A Max at 28 V DC |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12-4P |
| power consumption | 140W max. |
| power requirements | +28 to +72V DC |
| protection rating | IP55 |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 8 - 100% condensing |
| IP rating | IP 66 |
| temperature operational | -40°C to +60°C |
| temperature storage | -50 to +70°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| product height | 78 mm |
| product length | 168 mm |
| product weight | 1.5 kg |
| product width | 108 mm |
| ACCESSORIES | |
|---|---|
| db9 to usb adaptor | USB-RS485 |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1950 MHz |
| LO frequency 1 | 28.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 16W |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 70 dB |
| linear gain min | 60 dB |
| linear gain typ | 65 dB |
| linear power plin | 39 dBm min. |
| noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| output P1dB | 42 dBm min. |
| output power psat | 42 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -55 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -73 dBc/Hz |
| phase noise 1kHz offset max | -73 dBc/Hz |
| phase noise 10kHz offset max | -83 dBc/Hz |
| phase noise 100kHz offset max | -93 dBc/Hz |
| phase noise 1000kHz offset max | -103 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 4.8A Max at 28 V DC |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12-4P |
| power consumption | 140W max. |
| power requirements | +28 to +72V DC |
| protection rating | IP55 |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 8 - 100% condensing |
| IP rating | IP 66 |
| temperature operational | -40°C to +60°C |
| temperature storage | -50 to +70°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| product height | 78 mm |
| product length | 168 mm |
| product weight | 1.5 kg |
| product width | 108 mm |
| ACCESSORIES | |
|---|---|
| db9 to usb adaptor | USB-RS485 |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1950 MHz |
| LO frequency 1 | 28.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 16W |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 70 dB |
| linear gain min | 60 dB |
| linear gain typ | 65 dB |
| linear power plin | 39 dBm min. |
| noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| output P1dB | 42 dBm min. |
| output power psat | 42 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -55 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -73 dBc/Hz |
| phase noise 1kHz offset max | -73 dBc/Hz |
| phase noise 10kHz offset max | -83 dBc/Hz |
| phase noise 100kHz offset max | -93 dBc/Hz |
| phase noise 1000kHz offset max | -103 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 4.8A Max at 28 V DC |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12-4P |
| power consumption | 140W max. |
| power requirements | +28 to +72V DC |
| protection rating | IP55 |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 8 - 100% condensing |
| IP rating | IP 66 |
| temperature operational | -40°C to +60°C |
| temperature storage | -50 to +70°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| product height | 78 mm |
| product length | 168 mm |
| product weight | 1.5 kg |
| product width | 108 mm |
| ACCESSORIES | |
|---|---|
| db9 to usb adaptor | USB-RS485 |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1950 MHz |
| LO frequency 1 | 29.05 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 16W |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 70 dB |
| linear gain min | 60 dB |
| linear gain typ | 65 dB |
| linear power plin | 39 dBm min. |
| noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| output P1dB | 42 dBm min. |
| output power psat | 42 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -55 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -73 dBc/Hz |
| phase noise 1kHz offset max | -73 dBc/Hz |
| phase noise 10kHz offset max | -83 dBc/Hz |
| phase noise 100kHz offset max | -93 dBc/Hz |
| phase noise 1000kHz offset max | -103 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 4.8A Max at 28 V DC |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12-4P |
| power consumption | 140W max. |
| power requirements | +28 to +72V DC |
| protection rating | IP55 |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 8 - 100% condensing |
| IP rating | IP 66 |
| temperature operational | -40°C to +60°C |
| temperature storage | -50 to +70°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| product height | 78 mm |
| product length | 168 mm |
| product weight | 1.5 kg |
| product width | 108 mm |
| ACCESSORIES | |
|---|---|
| db9 to usb adaptor | USB-RS485 |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1950 MHz |
| LO frequency 1 | 29.05 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 16W |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 70 dB |
| linear gain min | 60 dB |
| linear gain typ | 65 dB |
| linear power plin | 39 dBm min. |
| noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| output P1dB | 42 dBm min. |
| output power psat | 42 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -55 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -73 dBc/Hz |
| phase noise 1kHz offset max | -73 dBc/Hz |
| phase noise 10kHz offset max | -83 dBc/Hz |
| phase noise 100kHz offset max | -93 dBc/Hz |
| phase noise 1000kHz offset max | -103 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 4.8A Max at 28 V DC |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12-4P |
| power consumption | 140W max. |
| power requirements | +28 to +72V DC |
| protection rating | IP55 |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 8 - 100% condensing |
| IP rating | IP 66 |
| temperature operational | -40°C to +60°C |
| temperature storage | -50 to +70°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| product height | 78 mm |
| product length | 168 mm |
| product weight | 1.5 kg |
| product width | 108 mm |
| ACCESSORIES | |
|---|---|
| db9 to usb adaptor | USB-RS485 |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1950 MHz |
| LO frequency 1 | 29.05 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 16W |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 70 dB |
| linear gain min | 60 dB |
| linear gain typ | 65 dB |
| linear power plin | 39 dBm min. |
| noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| output P1dB | 42 dBm min. |
| output power psat | 42 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -55 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -73 dBc/Hz |
| phase noise 1kHz offset max | -73 dBc/Hz |
| phase noise 10kHz offset max | -83 dBc/Hz |
| phase noise 100kHz offset max | -93 dBc/Hz |
| phase noise 1000kHz offset max | -103 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 4.8A Max at 28 V DC |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12-4P |
| power consumption | 140W max. |
| power requirements | +28 to +72V DC |
| protection rating | IP55 |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 8 - 100% condensing |
| IP rating | IP 66 |
| temperature operational | -40°C to +60°C |
| temperature storage | -50 to +70°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| product height | 78 mm |
| product length | 168 mm |
| product weight | 1.5 kg |
| product width | 108 mm |
| ACCESSORIES | |
|---|---|
| db9 to usb adaptor | USB-RS485 |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1950 MHz |
| LO frequency 1 | 29.05 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 16W |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 70 dB |
| linear gain min | 60 dB |
| linear gain typ | 65 dB |
| linear power plin | 39 dBm min. |
| noise power density | -70 dBm/Hz in Tx, -157 dBm/Hz in Rx |
| output P1dB | 42 dBm min. |
| output power psat | 42 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -55 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -73 dBc/Hz |
| phase noise 1kHz offset max | -73 dBc/Hz |
| phase noise 10kHz offset max | -83 dBc/Hz |
| phase noise 100kHz offset max | -93 dBc/Hz |
| phase noise 1000kHz offset max | -103 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 4.8A Max at 28 V DC |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, PT02E-12-4P |
| power consumption | 140W max. |
| power requirements | +28 to +72V DC |
| protection rating | IP55 |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, PT02E-12-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 8 - 100% condensing |
| IP rating | IP 66 |
| temperature operational | -40°C to +60°C |
| temperature storage | -50 to +70°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket, Mating Connectors for Power and M&C |
| product height | 78 mm |
| product length | 168 mm |
| product weight | 1.5 kg |
| product width | 108 mm |
| ACCESSORIES | |
|---|---|
| db9 to usb adaptor | USB-RS485 |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS300-AT1-(NA/UK/EU/IEC/CN/AU) |
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8517690000 |
| Country of Origin | Made in Canada |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | 254 mm x 226 mm x 178 mm |
| Unit Package Weight | - |
| Total Aluminium Content | 1.35 kg |
| Aluminum Country of Smelt and Cast | CA |
| Total Aluminium Value | $ 3.375 |
|
|
|
|
|
|


