| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±5 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | E |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±5 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±5 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±5 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±5 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±5 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±10 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±10 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±10 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±10 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±10 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±10 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±4 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±4 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±4 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±4 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±4 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±4 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±2 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±2 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±2 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±2 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±2 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±2 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±3 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±3 kHz |
| LO type | PLL |
| noise figure max | 24K |
| noise figure typ | 20K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±3 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±3 kHz |
| LO type | PLL |
| noise figure max | 28K |
| noise figure typ | 25K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±3 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| input frequency band 1 | 3.40 - 4.20 GHz |
| LO frequency 1 | 5.15 GHz |
| LO stability | ±3 kHz |
| LO type | PLL |
| noise figure max | 32K |
| noise figure typ | 30K |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1750 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 62 dB |
| Gain Flatness (over full band) | ≤ 6 dB p-p max. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | + 9 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -80 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 250 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | CPR 229G waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| temperature operational | -40 to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 99 mm |
| product length | 145 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
-
3000-Spec-Sheet.pdf
-
Norsat-LNB-Installation-Manual.pdf
-
3000-E10609-1703-IEC_60950-test-report.pdf
-
3000-RDG201209002-SF_EN62368-1-test-report.pdf.pdf
-
3000-E10609-1706-test-report.pdf
-
3000-E10609-1702-electromagnetic-comp-test-report.pdf
-
3000-E10609-1703-test-report.pdf
-
3000-attestation-of-conformity.pdf
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8517690000 |
| Country of Origin | Made in Canada |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | 190 x 100 x 70 mm |
| Unit Package Weight | 0.68 kg |
| Total Aluminium Content | 0.45 kg |
| Aluminum Country of Smelt and Cast | CN |
| Total Aluminium Value | $ 1.125 |

