| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±150 kHz |
| LO type | PLL |
| noise figure max | 0.8 dB |
| noise figure typ | 0.7 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±150 kHz |
| LO type | PLL |
| noise figure max | 0.9 dB |
| noise figure typ | 0.8 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±150 kHz |
| LO type | PLL |
| noise figure max | 1.0 dB |
| noise figure typ | 0.9 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±150 kHz |
| LO type | PLL |
| noise figure max | 0.8 dB |
| noise figure typ | 0.7 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | D |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±150 kHz |
| LO type | PLL |
| noise figure max | 0.9 dB |
| noise figure typ | 0.8 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | D |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±150 kHz |
| LO type | PLL |
| noise figure max | 1.0 dB |
| noise figure typ | 0.9 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±250 kHz |
| LO type | PLL |
| noise figure max | 0.8 dB |
| noise figure typ | 0.7 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±500 kHz |
| LO type | PLL |
| noise figure max | 0.8 dB |
| noise figure typ | 0.7 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±250 kHz |
| LO type | PLL |
| noise figure max | 0.9 dB |
| noise figure typ | 0.8 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±500 kHz |
| LO type | PLL |
| noise figure max | 0.9 dB |
| noise figure typ | 0.8 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±250 kHz |
| LO type | PLL |
| noise figure max | 1.0 dB |
| noise figure typ | 0.9 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±500 kHz |
| LO type | PLL |
| noise figure max | 1.0 dB |
| noise figure typ | 0.9 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±250 kHz |
| LO type | PLL |
| noise figure max | 0.8 dB |
| noise figure typ | 0.7 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | D |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±500 kHz |
| LO type | PLL |
| noise figure max | 0.8 dB |
| noise figure typ | 0.7 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | D |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±250 kHz |
| LO type | PLL |
| noise figure max | 0.9 dB |
| noise figure typ | 0.8 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | D |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±500 kHz |
| LO type | PLL |
| noise figure max | 0.9 dB |
| noise figure typ | 0.8 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | D |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±250 kHz |
| LO type | PLL |
| noise figure max | 1.0 dB |
| noise figure typ | 0.9 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| input frequency band 1 | 11.70 - 12.20 GHz |
| LO frequency 1 | 10.75 GHz |
| LO stability | ±500 kHz |
| LO type | PLL |
| noise figure max | 1.0 dB |
| noise figure typ | 0.9 dB |
| number of onboard LOs | Single-Band |
| output frequency band 1 | 950 - 1450 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| conversion gain max | 70 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | + 2 dBm min. |
| output VSWR | 2.5 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 300 mA max. |
| power requirements | +15 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-75 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 43 mm |
| product length | 85 mm |
| product weight | 0.2 kg |
| product width | 43 mm |
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8517690000 |
| Country of Origin | Made in the Republic of Korea |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | 110 x 55 x 50 mm |
| Unit Package Weight | 0.2 kg |
| Total Aluminium Content | 0.095 kg |
| Aluminum Country of Smelt and Cast | KR |
| Total Aluminium Value | $ 2.375 |
Customer Reviews
5.0 Based on 1 Reviews
5 ★
100%
1
4 ★
0%
0
3 ★
0%
0
2 ★
0%
0
1 ★
0%
0
Customer Photos
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Be the first to review this item
Filter Reviews:
×
Clear filter
More Filters
RO
12/03/2024
Richard O.
low cost, high quality
We have been supplying these for several years on a large Radio distribution network. The large quantity dictated low cost but the remoteness of the receive sites dictated quality. The 4507AF delivers both.


