| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 18.20 - 19.20 GHz |
| input frequency band 2 | 19.20 - 20.20 GHz |
| LO frequency 1 | 17.25 GHz |
| LO frequency 2 | 18.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 2.3 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 122.1 mm |
| product weight | 0.42 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 18.20 - 19.20 GHz |
| input frequency band 2 | 19.20 - 20.20 GHz |
| LO frequency 1 | 17.25 GHz |
| LO frequency 2 | 18.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 2.3 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 119.6 mm |
| product weight | 0.42 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 19.20 - 20.20 GHz |
| input frequency band 2 | 20.20 - 21.20 GHz |
| LO frequency 1 | 18.25 GHz |
| LO frequency 2 | 19.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 2.3 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 122.1 mm |
| product weight | 0.42 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 19.20 - 20.20 GHz |
| input frequency band 2 | 20.20 - 21.20 GHz |
| LO frequency 1 | 18.25 GHz |
| LO frequency 2 | 19.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 2.3 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 119.6 mm |
| product weight | 0.42 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 20.20 - 21.20 GHz |
| input frequency band 2 | 21.20 - 22.20 GHz |
| LO frequency 1 | 19.25 GHz |
| LO frequency 2 | 20.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.8 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 2.3 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 122.1 mm |
| product weight | 0.42 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 20.20 - 21.20 GHz |
| input frequency band 2 | 21.20 - 22.20 GHz |
| LO frequency 1 | 19.25 GHz |
| LO frequency 2 | 20.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.8 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 2.3 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 119.6 mm |
| product weight | 0.42 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 18.20 - 19.20 GHz |
| input frequency band 2 | 19.20 - 20.20 GHz |
| LO frequency 1 | 17.25 GHz |
| LO frequency 2 | 18.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 1.5 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 144.3 mm |
| product weight | 0.465 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 18.20 - 19.20 GHz |
| input frequency band 2 | 19.20 - 20.20 GHz |
| LO frequency 1 | 17.25 GHz |
| LO frequency 2 | 18.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 1.5 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 141.8 mm |
| product weight | 0.465 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 19.20 - 20.20 GHz |
| input frequency band 2 | 20.20 - 21.20 GHz |
| LO frequency 1 | 18.25 GHz |
| LO frequency 2 | 19.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 1.5 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 144.3 mm |
| product weight | 0.465 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 19.20 - 20.20 GHz |
| input frequency band 2 | 20.20 - 21.20 GHz |
| LO frequency 1 | 18.25 GHz |
| LO frequency 2 | 19.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 1.5 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 141.8 mm |
| product weight | 0.465 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 20.20 - 21.20 GHz |
| input frequency band 2 | 21.20 - 22.20 GHz |
| LO frequency 1 | 19.25 GHz |
| LO frequency 2 | 20.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.8 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 1.5 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 144.3 mm |
| product weight | 0.465 kg |
| product width | 60 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 20.20 - 21.20 GHz |
| input frequency band 2 | 21.20 - 22.20 GHz |
| LO frequency 1 | 19.25 GHz |
| LO frequency 2 | 20.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.8 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p |
| input VSWR | 1.5 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.3 : 1 max. |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -78 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 450 mA max. |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 45 mm |
| product length | 141.8 mm |
| product weight | 0.465 kg |
| product width | 60 mm |
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8517690000 |
| Country of Origin | Made in the Republic of Korea |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | 118 x 60 x 45 mm |
| Unit Package Weight | 0.4 kg |
| Total Aluminium Content | 0.34 kg |
| Aluminum Country of Smelt and Cast | KR |
| Total Aluminium Value | $ 0.85 |


