KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
input frequency band 1 | 17.30 - 18.30 GHz |
input frequency band 2 | 18.30 - 19.30 GHz |
input frequency band 3 | 19.30 - 20.20 GHz |
LO frequency 1 | 16.35 GHz |
LO frequency 2 | 17.35 GHz |
LO frequency 3 | 18.35 GHz |
LO stability | Ext Ref |
LO type | EXT |
noise figure max | 2.0 dB |
noise figure typ | 1.6 dB |
number of onboard LOs | Triple-Band |
output frequency band 1 | 950 - 1950 MHz |
output frequency band 2 | 950 - 1950 MHz |
output frequency band 3 | 950 - 1950 MHz |
Product Revision | C |
RF SPECIFICATIONS | |
---|---|
control signal 1 | 13V / No Tone |
control signal 2 | 18V / No Tone |
control signal 3 | 13V / 22kHz Tone |
conversion gain max | 70 dB |
conversion gain min | 58 dB |
conversion gain typ | 65 dB |
Gain Flatness (over full band) | ≤ 4 dB p-p max. |
image rejection | 40 dBc min @ L.O. 16.35 ; 30 dBc min @ 17.35 ; 0 dBc @ 18.35 |
input VSWR | 2.5 : 1 max. |
output P1dB | + 5 dBm min. |
output VSWR | 2.2 : 1 max. |
phase noise 100kHz offset max | Depends on External Reference |
spurious | -60 dBc @ 10 dBm (in band) ; -50 dBc @ 10 dBm (out of band) |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption | 400 mA |
power requirements | +11 to +26V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F-Connector |
RF input connector | WR-42 waveguide grooved |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
IP rating | IP 67 |
temperature operational | -40 to +60°C |
temperature storage | -40 to +80°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 39 mm |
product length | 133 mm |
product weight | 0.5 kg |
product width | 70 mm |