MEDIAN 175W X-Band GaAs BUC (DC + EXT Ref)
MEDIAN 175W X-Band GaAs BUC (DC + EXT Ref)
MEDIAN 175W X-Band GaAs BUC (DC + EXT Ref)
MEDIAN 175W X-Band GaAs BUC (DC + EXT Ref)

MEDIBX175D-XN-C

MEDIAN 175W X-Band GaAs BUC (DC + EXT Ref)

Please sign in or create an account to view the price and availability.

(Scroll to see specifications and documents)

Only 0 items in stock!



For the X-Band Median BUC, a receive reject filter must be purchased as an add-on accessory unless:
1) you are using a Tx-only antenna and do not require the receive function; or
2) your terminal already includes embedded filters. The receive reject filter is sold separately at an additional cost.

The Standard Version MEDIAN BUCs offer higher gain to reduce the need for line amplifiers in long cable runs (IFL). In contrast, the WGS-Compatible Versions have lower gain to allow operation with IF signals driven up to 0 dBm.

Cyber-Hardened Intelligent BUCs are designed to enhance satellite ground terminal security for industries requiring optimized and flexible protection. These BUCs implement effective security management controls—including encrypted authentication, privacy, and access control—to ensure end-to-end message transmission. They help protect against session hijacking, password attacks, and eavesdropping.

KEY SPECIFICATIONS
band X-Band
external ref freq 10 MHz -12 to +5 dBm
frequency sense Non-Inverting
input frequency band 1 950 - 1450 MHz
number of onboard LOs Single-Band
output frequency band 1 7.900 - 8.400 GHz
output power rated 175W
product family MEDIAN
reference type External Reference
Product Revision A
RF SPECIFICATIONS
AM-PM conversion < 3.0 deg/dB @ Rated Power
attenuator range 30 dB Variable in 0.1 dB Steps
gain flatness (1MHz) 0.25 dB p-p max
gain flatness (36MHz) 1.5 dB p-p max
gain flatness (over full band) 4 dB p-p max
gain variation over temperature (open loop) 3 dB p-p max
gain variation over temperature (witg AGC) 1 dB p-p max
gain version Std Options and Std Specs
group delay linear 0.03 ns/MHz
group delay parabolic 0.003 ns/MHz178
group delay ripple 1 ns p-p Over Any 36 MHz
harmonics -60 dBc max
IMD3 -27 dBc max
input impedance 50 Ohm
input power detector range -35 to 0 dBm
input VSWR 1.5 : 1
Level Stability with ALC ± 0.5 dB
mute -70 dBc Max.
output noise power density Rx < -165 dBm/Hz (with RX Reject Filter)
output noise power density Tx < -75 dBm/Hz
output P1dB +52.4 dBm min
output Plin 46.8 dBm
output spurious in band 65 dBc
output spurious out of band Complies with MIL-STD 188-164C
output VSWR 1.5 : 1 max
phase noise 0.01kHz offset max -115 dBC/Hz
phase noise 0.1kHz offset max -140 dBc/Hz
small signal gain 72 dB min
ELECTRICAL SPECIFICATIONS
current consumption 1200 W
output power detector range Rated Power to -20 dB
power reading accuracy ± 1.0 dB max
power requirements 42-60V DC
power supply DC Powered, No Power Thru Coax, 48 ± 11 VDC
INTERFACE SPECIFICATIONS
IF connector N
M and C option Cyber Hardened
output connector CPR-112G
ENVIRONMENTAL SPECIFICATIONS
altitude 10,000 ft (3,000 m) ASL
humidity 100% Condensing
IP rating IP 65+
temperature operational -40°C to +55°C
PHYSICAL SPECIFICATIONS
product height 183 mm
product length 412 mm
product weight 14.5 kg
product width 254 mm