MDC400ANE-SN-S
MEDIAN 400W C-Band GaAs BUC (Standard Gain + Standard M&C + AC)
Regular price Sale pricePlease sign in or create an account to view the price and availability.
(Scroll to see specifications and documents)
Send a copy to email:
By entering your email, you agree that it will be seen by the store Norsat and may contact you.
Email is required.
Or download now:
Something went wrong. Please try again.
Open here
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 950 - 1525 MHz |
| output frequency band 1 | 5.850 - 6.425 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 1125 - 1425 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1275 MHz |
| output frequency band 1 | 6.425 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 965 - 1265 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 1150 - 1450 MHz |
| output frequency band 1 | 6.725 - 7.025 MHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 3 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 960 - 1750 MHz |
| output frequency band 1 | 5.850 - 6.650 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Non-Inverting |
| input frequency band 1 | 950 - 1825 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| external ref freq | 10 MHz -12 to +5 dBm |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | External Reference |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -115 dBC/Hz |
| phase noise 0.1kHz offset max | -140 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal Standard Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| phase noise 0.01kHz offset max | -54 dBc/Hz |
| phase noise 0.1kHz offset max | -79 dBc/Hz |
| phase noise 100kHz offset max | -100 dBc/Hz |
| phase noise 1000kHz offset max | -110 dBc/Hz |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | C-Band |
| frequency sense | Inverting |
| input frequency band 1 | 975 - 1850 MHz |
| output frequency band 1 | 5.850 - 6.725 GHz |
| output power rated | 400W |
| reference type | Internal High Stability |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| attenuator range | 30 dB Variable in 0.1 dB Steps |
| gain flatness (1MHz) | 0.25 dB p-p max |
| gain flatness (36MHz) | 1.5 dB p-p max |
| gain flatness (over full band) | 4 dB p-p max |
| gain variation over temperature (open loop) | 4 dB p-p max |
| gain variation over temperature (witg AGC) | 1 dB p-p max |
| gain version | Std Options and Std Specs |
| harmonics | -50 dBc max |
| IMD3 | -25 dBc max |
| input impedance | 50 Ohm |
| input power detector range | -50 to -15 dBm |
| input VSWR | 1.5 : 1 max |
| Level Stability with ALC | ± 0.5 dB |
| output noise power density Rx | < -145 dBm/Hz |
| output noise power density Tx | < -74 dBm/Hz |
| output P1dB | +56 dBm min |
| output spurious in band | -70 dBc |
| output spurious out of band | Complies with EN 301 443 & MIL-STD 188-164C |
| output VSWR | 1.3 : 1 max |
| small signal gain | 82 dB min |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 2350 VA |
| output power detector range | Rated Power to -20 dB |
| power reading accuracy | ± 1.0 dB max |
| power requirements | 200 to 240 VAC |
| power supply | AC Powered |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | TNC |
| M and C option | Standard M&C |
| output connector | CPR-137G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| altitude | 10,000 ft (3,000 m) ASL |
| humidity | 100% Condensing |
| IP rating | IP 65+ |
| temperature operational | -40°C to +55°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 257 mm |
| product length | 737 mm |
| product weight | 37.6 kg |
| product width | 381 mm |
Please contact us to request any additional documents you may need.
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8517620090 |
| Country of Origin | Made in USA |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | 991 mm x 610 mm x 584 mm |
| Unit Package Weight | 58.06 kg |
Norsat's in-house experts produce technical and professional industrial whitepapers.
View our instructional videos to get more information on satellite terminals, components, assembly and software.
Read Norsat's brochures and manuals to learn more about satellite knowledge to product-focused deep dives.
Yes
