MEDIAN 50W X-Band GaAs BUC (DC + INT Ref High Stability)
MEDIAN 50W X-Band GaAs BUC (DC + INT Ref High Stability)
MEDIAN 50W X-Band GaAs BUC (DC + INT Ref High Stability)
MEDIAN 50W X-Band GaAs BUC (DC + INT Ref High Stability)

MEDIBX050DS-XN-S

MEDIAN 50W X-Band GaAs BUC (DC + INT Ref High Stability)

Please sign in or create an account to view the price and availability.

(Scroll to see specifications and documents)

Only 0 items in stock!



For the X-Band Median BUC, a receive reject filter must be purchased as an add-on accessory unless:
1) you are using a Tx-only antenna and do not require the receive function; or
2) your terminal already includes embedded filters. The receive reject filter is sold separately at an additional cost.

The Standard Version MEDIAN BUCs offer higher gain to reduce the need for line amplifiers in long cable runs (IFL). In contrast, the WGS-Compatible Versions have lower gain to allow operation with IF signals driven up to 0 dBm.

Cyber-Hardened Intelligent BUCs are designed to enhance satellite ground terminal security for industries requiring optimized and flexible protection. These BUCs implement effective security management controls—including encrypted authentication, privacy, and access control—to ensure end-to-end message transmission. They help protect against session hijacking, password attacks, and eavesdropping.

KEY SPECIFICATIONS
band X-Band
frequency sense Non-Inverting
input frequency band 1 950 - 1450 MHz
number of onboard LOs Single-Band
output frequency band 1 7.900 - 8.400 GHz
output power rated 50W
product family MEDIAN
reference type Internal High Stability
Product Revision A
RF SPECIFICATIONS
AM-PM conversion < 3.0 deg/dB @ Rated Power
attenuator range 30 dB variable in 0.1 dB steps
gain flatness (1MHz) 0.25 dB p-p max
gain flatness (36MHz) 1 dB p-p max
gain flatness (over full band) 3 dB p-p max
gain variation over temperature (open loop) 3 dB p-p max
gain variation over temperature (witg AGC) 1 dB p-p max
gain version Std Options and Std Specs
group delay linear 0.03 ns/MHz
group delay parabolic 0.003 ns/MHz²
group delay ripple 1 ns p-p Over Any 36 MHz
harmonics -60 dBc max
IMD3 -27 dBc max
input impedance 50 Ohm
input power detector range -55 to -20 dBm
input VSWR 1.5 : 1
Level Stability with ALC ± 0.5 dB
mute -70 dBc Max.
output noise power density Rx < -79 dBm/Hz (w/o RX Reject Filer)
output noise power density Tx < -79 dBm/Hz
output P1dB +47 dBm min
output Plin 46 dBm
output spurious in band -65 dBc
output spurious out of band Complies with MIL STD 188-164C
output VSWR 1.5 : 1 max
small signal gain 78 dB min
ELECTRICAL SPECIFICATIONS
current consumption 350W
output power detector range Rated Power to -20 dB
power reading accuracy ± 1.0 max
power requirements 48 ± 11 VDC
power supply DC Powered, No Power Thru Coax, 48 ± 11 VDC
INTERFACE SPECIFICATIONS
IF connector N
M and C option Standard M&C
output connector CPR-112G
ENVIRONMENTAL SPECIFICATIONS
altitude 10,000 ft (3,000 m) ASL
humidity 100% Condensing
IP rating IP 65+
temperature operational -40°C to +55°C
PHYSICAL SPECIFICATIONS
product height 145 mm
product length 267 mm
product weight 5.2 kg
product width 152 mm