KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 1000 - 2000 MHz |
number of onboard LOs | Triple-Band |
output frequency band 1 | 27.50 - 28.50 GHz |
output frequency band 2 | 28.25 - 29.25 GHz |
output frequency band 3 | 29.00 - 30.00 GHz |
output power rated | 40W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB@Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 4 dB p-p max |
gain flatness (36MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 1 dB p-p max |
gain variation over temperature (witg AGC) | WR28 UG Cover with Groove |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -55 to -20 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +46 dBm |
output Plin | +43 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -125 dBc/Hz |
phase noise 0.1kHz offset max | -150 dBc/Hz |
phase noise 100kHz offset max | -165 dBc/Hz |
small signal gain | 77 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 300VA |
current consumption Psat | 400VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 165 mm |
product length | 267 mm |
product weight | 5.8 kg |
product width | 152 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 1000 - 2000 MHz |
number of onboard LOs | Triple-Band |
output frequency band 1 | 27.50 - 28.50 GHz |
output frequency band 2 | 28.25 - 29.25 GHz |
output frequency band 3 | 29.00 - 30.00 GHz |
output power rated | 40W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB@Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 4 dB p-p max |
gain flatness (36MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 1 dB p-p max |
gain variation over temperature (witg AGC) | WR28 UG Cover with Groove |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -55 to -20 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +46 dBm |
output Plin | +43 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -125 dBc/Hz |
phase noise 0.1kHz offset max | -150 dBc/Hz |
phase noise 100kHz offset max | -165 dBc/Hz |
small signal gain | 77 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 300VA |
current consumption Psat | 400VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 165 mm |
product length | 267 mm |
product weight | 5.8 kg |
product width | 152 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 1000 - 2000 MHz |
number of onboard LOs | Triple-Band |
output frequency band 1 | 27.50 - 28.50 GHz |
output frequency band 2 | 28.25 - 29.25 GHz |
output frequency band 3 | 29.00 - 30.00 GHz |
output power rated | 40W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB@Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 4 dB p-p max |
gain flatness (36MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 1 dB p-p max |
gain variation over temperature (witg AGC) | WR28 UG Cover with Groove |
gain version | WGS Compatibility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +46 dBm |
output Plin | +43 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -125 dBc/Hz |
phase noise 0.1kHz offset max | -150 dBc/Hz |
phase noise 100kHz offset max | -165 dBc/Hz |
small signal gain | 66 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 300VA |
current consumption Psat | 400VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 165 mm |
product length | 267 mm |
product weight | 5.8 kg |
product width | 152 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 1000 - 2000 MHz |
number of onboard LOs | Triple-Band |
output frequency band 1 | 27.50 - 28.50 GHz |
output frequency band 2 | 28.25 - 29.25 GHz |
output frequency band 3 | 29.00 - 30.00 GHz |
output power rated | 40W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB@Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 4 dB p-p max |
gain flatness (36MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 1 dB p-p max |
gain variation over temperature (witg AGC) | WR28 UG Cover with Groove |
gain version | WGS Compatibility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +46 dBm |
output Plin | +43 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -125 dBc/Hz |
phase noise 0.1kHz offset max | -150 dBc/Hz |
phase noise 100kHz offset max | -165 dBc/Hz |
small signal gain | 66 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 300VA |
current consumption Psat | 400VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 165 mm |
product length | 267 mm |
product weight | 5.8 kg |
product width | 152 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 1000 - 2000 MHz |
number of onboard LOs | Triple-Band |
output frequency band 1 | 27.50 - 28.50 GHz |
output frequency band 2 | 28.25 - 29.25 GHz |
output frequency band 3 | 29.00 - 30.00 GHz |
output power rated | 40W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB@Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 4 dB p-p max |
gain flatness (36MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 1 dB p-p max |
gain variation over temperature (witg AGC) | WR28 UG Cover with Groove |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -55 to -20 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +46 dBm |
output Plin | +43 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -125 dBc/Hz |
phase noise 0.1kHz offset max | -150 dBc/Hz |
phase noise 100kHz offset max | -165 dBc/Hz |
small signal gain | 77 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 300VA |
current consumption Psat | 400VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Standard M&C |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 165 mm |
product length | 267 mm |
product weight | 5.8 kg |
product width | 152 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 1000 - 2000 MHz |
number of onboard LOs | Triple-Band |
output frequency band 1 | 27.50 - 28.50 GHz |
output frequency band 2 | 28.25 - 29.25 GHz |
output frequency band 3 | 29.00 - 30.00 GHz |
output power rated | 40W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB@Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 4 dB p-p max |
gain flatness (36MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 1 dB p-p max |
gain variation over temperature (witg AGC) | WR28 UG Cover with Groove |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -55 to -20 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +46 dBm |
output Plin | +43 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -125 dBc/Hz |
phase noise 0.1kHz offset max | -150 dBc/Hz |
phase noise 100kHz offset max | -165 dBc/Hz |
small signal gain | 77 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 300VA |
current consumption Psat | 400VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Standard M&C |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 165 mm |
product length | 267 mm |
product weight | 5.8 kg |
product width | 152 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 1000 - 2000 MHz |
number of onboard LOs | Triple-Band |
output frequency band 1 | 27.50 - 28.50 GHz |
output frequency band 2 | 28.25 - 29.25 GHz |
output frequency band 3 | 29.00 - 30.00 GHz |
output power rated | 40W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB@Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 4 dB p-p max |
gain flatness (36MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 1 dB p-p max |
gain variation over temperature (witg AGC) | WR28 UG Cover with Groove |
gain version | WGS Compatibility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +46 dBm |
output Plin | +43 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -125 dBc/Hz |
phase noise 0.1kHz offset max | -150 dBc/Hz |
phase noise 100kHz offset max | -165 dBc/Hz |
small signal gain | 66 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 300VA |
current consumption Psat | 400VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Standard M&C |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 165 mm |
product length | 267 mm |
product weight | 5.8 kg |
product width | 152 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
external ref freq | 10 MHz -12 to +5 dBm |
frequency sense | Non-Inverting |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 1000 - 2000 MHz |
number of onboard LOs | Triple-Band |
output frequency band 1 | 27.50 - 28.50 GHz |
output frequency band 2 | 28.25 - 29.25 GHz |
output frequency band 3 | 29.00 - 30.00 GHz |
output power rated | 40W |
reference type | External Reference |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB@Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (1MHz) | 4 dB p-p max |
gain flatness (36MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 1 dB p-p max |
gain variation over temperature (witg AGC) | WR28 UG Cover with Groove |
gain version | WGS Compatibility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -74 dBm/Hz |
output P1dB | +46 dBm |
output Plin | +43 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc |
output VSWR | 1.3 : 1 max |
phase noise 0.01kHz offset max | -125 dBc/Hz |
phase noise 0.1kHz offset max | -150 dBc/Hz |
phase noise 100kHz offset max | -165 dBc/Hz |
small signal gain | 66 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 300VA |
current consumption Psat | 400VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Standard M&C |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
IP rating | IP 65+ |
temperature operational | -40°C to +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height | 165 mm |
product length | 267 mm |
product weight | 5.8 kg |
product width | 152 mm |
Please contact us to request any additional documents you may need.
Please contact us to request any additional documents you may need.
INFORMATION | |
---|---|
HS Code | 8517620090 |
Country of Origin | Made in USA |
Ex Works | Richmond, BC, Canada |
ECCN Number | EAR99 |
Warranty | 3 years |
Unit Package Dimensions | 432 mm x 254 mm x 254 mm |
Unit Package Weight | 6.35 kg |