| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | M: Military |
| input frequency band 1 | 30.00 - 31.00 GHz |
| output frequency band 1 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | C: Commercial |
| input frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 1: Internal Fan |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & Ethernet |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | No Add-on |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | F: EMI/EMC Filter |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | P: Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| band type | D: Dual Band |
| input frequency band 1 | 29.00 - 30.00 GHz |
| input frequency band 2 | 950 - 1950 MHz |
| LO frequency 2 | 29.05 GHz |
| output frequency band 1 | 29.00 - 30.00 GHz |
| output frequency band 2 | 30.00 - 31.00 GHz |
| output power rated | 50W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (40MHz) | ≤ 1.0 dB p-p |
| Gain Flatness (over full band) | ≤ 4.0 dB p-p |
| Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
| input power | via power connector |
| input VSWR | 2.5 : 1 max. |
| Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
| linear power plin | 44 dBm min. |
| noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
| output power psat | 47 dBm min. |
| output spurious in band | ≤ -55 dBc |
| output spurious out of band | ≤ -60 dBc |
| output VSWR | 1.9 : 1 max. |
| phase noise 0.1kHz offset max | -62 dBc/Hz |
| phase noise 1kHz offset max | -76 dBc/Hz |
| phase noise 10kHz offset max | -86 dBc/Hz |
| phase noise 100kHz offset max | -96 dBc/Hz |
| phase noise 1000kHz offset max | -102 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| maximum current 20 VDC | 29.0A max. |
| power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
| power consumption psat | 580 W max. |
| power requirements | +20 to +56 V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | SMA-Connector |
| RF output connector | WR-28 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
| m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
| m and c interface | RS-485 & RS-232 |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 100% condensing |
| IP rating | IP 65 |
| temperature operational | -40°C to +60°C |
| temperature storage | -54 to +71°C |
| thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| cooling | 2: External Baseplate |
| enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
| product height | 120 mm |
| product length | 300 mm |
| product weight | 3.2 kg |
| product width | 140 mm |
| ACCESSORIES | |
|---|---|
| optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
| optional m and c cable 10m | CABLEM+C-AT10 |
| optional power supply | PS600-AT1-(NA/UK/EU/IEC/CN/AU) |
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8517690000 |
| Country of Origin | Made in Canada |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | - |
| Unit Package Weight | - |
| Total Aluminium Content | 2.79 kg |
| Aluminum Country of Smelt and Cast | CN |
| Total Aluminium Value | $ 6.975 |
|
|
|
|
|
|


