| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 130W max. |
| power requirements | +85 to +265V AC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 149.3 mm |
| product length | 220 mm |
| product weight | 5.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 130W max. |
| power requirements | +85 to +265V AC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 149.3 mm |
| product length | 220 mm |
| product weight | 5.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 130W max. |
| power requirements | +85 to +265V AC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 149.3 mm |
| product length | 220 mm |
| product weight | 5.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 130W max. |
| power requirements | +85 to +265V AC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 149.3 mm |
| product length | 220 mm |
| product weight | 5.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 130W max. |
| power requirements | +85 to +265V AC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 149.3 mm |
| product length | 220 mm |
| product weight | 5.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 130W max. |
| power requirements | +85 to +265V AC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 149.3 mm |
| product length | 220 mm |
| product weight | 5.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +18 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via IFL |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | E: Extended |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1700 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | S: Standard |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 14.00 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ku-Band |
| band type | C: Band C |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 950 - 1450 MHz |
| LO frequency 1 | 12.80 GHz |
| output frequency band 1 | 13.75 - 14.50 GHz |
| output power rated | 10W |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| gain flatness (54MHz) | ≤ 1.5 dB p-p |
| Gain Flatness (over full band) | ≤ 4 dB p-p |
| Gain Flatness (over temperature) | ≤ 4.0 dB p-p |
| input VSWR | 2.0 : 1 max. |
| linear gain max | 72 dB |
| linear gain min | 62 dB |
| linear gain typ | 67 dB |
| output P1dB | 39.5 dBm min. |
| output power psat | 40 dBm min. |
| output spurious in band | ≤ -60 dBc |
| output spurious out of band | ≤ -50 dBc |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -65 dBc/Hz |
| phase noise 1kHz offset max | -75 dBc/Hz |
| phase noise 10kHz offset max | -85 dBc/Hz |
| phase noise 100kHz offset max | -95 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input power | via MS Connector |
| power consumption | 100W max. |
| power requirements | +36 to +60V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF output connector | WR75G |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0 - 100% condensing |
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| enclosed accessories | Screws, Gasket |
| product height | 103.5 mm |
| product length | 220 mm |
| product weight | 4.5 kg |
| product width | 194.2 mm |
Please contact us to request any additional documents you may need.
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8543700000 |
| Country of Origin | Made in the Republic of Korea |
| Ex Works | Hong Kong |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | 293 mm x 270 mm x 163 mm |
| Unit Package Weight | 5 kg |
| Total Aluminium Content | 3.19 kg |
| Aluminum Country of Smelt and Cast | KR |
| Total Aluminium Value | $ 7.975 |



