| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 10 to 0 dBm |
| input frequency band 1 | 17.852 - 18.588 GHz |
| input frequency band 2 | 18.372 - 19.300 GHz |
| LO frequency 1 | 16.80 GHz |
| LO frequency 2 | 17.40 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.5 dB |
| noise figure typ | 1.2 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 1052 - 1788 MHz |
| output frequency band 2 | 972 - 1900 MHz |
| Product Revision | D |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V |
| control signal 2 | 18V |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | ≤ 5 dB p-p max. |
| input VSWR | 2.0 : 1 max. |
| output P1dB | + 5 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| power requirements | +11V to +26V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 104 mm |
| product weight | 0.4 kg |
| product width | 60 mm |


