| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 18.20 - 19.20 GHz |
| input frequency band 2 | 19.20 - 20.20 GHz |
| input frequency band 3 | 20.20 - 21.20 GHz |
| input frequency band 4 | 21.20 - 22.20 GHz |
| LO frequency 1 | 17.25 GHz |
| LO frequency 2 | 18.25 GHz |
| LO frequency 3 | 19.25 GHz |
| LO frequency 4 | 20.25 GHz |
| LO stability | Ext Ref |
| LO type | EXT |
| noise figure max | 2.0 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Quad-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| output frequency band 3 | 950 - 1950 MHz |
| output frequency band 4 | 950 - 1950 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 13V / 22kHz Tone |
| control signal 3 | 18V / No Tone |
| control signal 4 | 18V / 22kHz Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 3.5 : 1 max. |
| output P1dB | + 10 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 1kHz offset max | Depends on External Reference |
| phase noise 10kHz offset max | Depends on External Reference |
| phase noise 100kHz offset max | Depends on External Reference |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 134 mm |
| product weight | 0.56 kg |
| product width | 67 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 18.20 - 19.20 GHz |
| input frequency band 2 | 19.20 - 20.20 GHz |
| input frequency band 3 | 20.20 - 21.20 GHz |
| input frequency band 4 | 21.20 - 22.20 GHz |
| LO frequency 1 | 17.25 GHz |
| LO frequency 2 | 18.25 GHz |
| LO frequency 3 | 19.25 GHz |
| LO frequency 4 | 20.25 GHz |
| LO stability | Ext Ref |
| LO type | EXT |
| noise figure max | 2.0 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Quad-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| output frequency band 3 | 950 - 1950 MHz |
| output frequency band 4 | 950 - 1950 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 13V / 22kHz Tone |
| control signal 3 | 18V / No Tone |
| control signal 4 | 18V / 22kHz Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 3.5 : 1 max. |
| output P1dB | + 10 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 1kHz offset max | Depends on External Reference |
| phase noise 10kHz offset max | Depends on External Reference |
| phase noise 100kHz offset max | Depends on External Reference |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 134 mm |
| product weight | 0.56 kg |
| product width | 67 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 18.20 - 19.20 GHz |
| input frequency band 2 | 19.20 - 20.20 GHz |
| input frequency band 3 | 20.20 - 21.20 GHz |
| input frequency band 4 | 21.20 - 22.20 GHz |
| LO frequency 1 | 17.25 GHz |
| LO frequency 2 | 18.25 GHz |
| LO frequency 3 | 19.25 GHz |
| LO frequency 4 | 20.25 GHz |
| LO stability | Ext Ref |
| LO type | EXT |
| noise figure max | 1.8 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Quad-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| output frequency band 3 | 950 - 1950 MHz |
| output frequency band 4 | 950 - 1950 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 13V / 22kHz Tone |
| control signal 3 | 18V / No Tone |
| control signal 4 | 18V / 22kHz Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 1.3 : 1 max. |
| output P1dB | + 10 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 1kHz offset max | Depends on External Reference |
| phase noise 10kHz offset max | Depends on External Reference |
| phase noise 100kHz offset max | Depends on External Reference |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 156 mm |
| product weight | 0.56 kg |
| product width | 67 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 18.20 - 19.20 GHz |
| input frequency band 2 | 19.20 - 20.20 GHz |
| input frequency band 3 | 20.20 - 21.20 GHz |
| input frequency band 4 | 21.20 - 22.20 GHz |
| LO frequency 1 | 17.25 GHz |
| LO frequency 2 | 18.25 GHz |
| LO frequency 3 | 19.25 GHz |
| LO frequency 4 | 20.25 GHz |
| LO stability | Ext Ref |
| LO type | EXT |
| noise figure max | 1.8 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Quad-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| output frequency band 3 | 950 - 1950 MHz |
| output frequency band 4 | 950 - 1950 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 13V / 22kHz Tone |
| control signal 3 | 18V / No Tone |
| control signal 4 | 18V / 22kHz Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 1.3 : 1 max. |
| output P1dB | + 10 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 1kHz offset max | Depends on External Reference |
| phase noise 10kHz offset max | Depends on External Reference |
| phase noise 100kHz offset max | Depends on External Reference |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 156 mm |
| product weight | 0.56 kg |
| product width | 67 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 17.20 - 18.20 GHz |
| input frequency band 2 | 18.20 - 19.20 GHz |
| input frequency band 3 | 19.20 - 20.20 GHz |
| input frequency band 4 | 20.20 - 21.20 GHz |
| LO frequency 1 | 16.25 GHz |
| LO frequency 2 | 17.25 GHz |
| LO frequency 3 | 18.25 GHz |
| LO frequency 4 | 19.25 GHz |
| LO stability | Ext Ref |
| LO type | EXT |
| noise figure max | 2.0 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Quad-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| output frequency band 3 | 950 - 1950 MHz |
| output frequency band 4 | 950 - 1950 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 13V / 22kHz Tone |
| control signal 3 | 18V / No Tone |
| control signal 4 | 18V / 22kHz Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 3.5 : 1 max. |
| output P1dB | + 10 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 1kHz offset max | Depends on External Reference |
| phase noise 10kHz offset max | Depends on External Reference |
| phase noise 100kHz offset max | Depends on External Reference |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 134 mm |
| product weight | 0.56 kg |
| product width | 67 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 17.20 - 18.20 GHz |
| input frequency band 2 | 18.20 - 19.20 GHz |
| input frequency band 3 | 19.20 - 20.20 GHz |
| input frequency band 4 | 20.20 - 21.20 GHz |
| LO frequency 1 | 16.25 GHz |
| LO frequency 2 | 17.25 GHz |
| LO frequency 3 | 18.25 GHz |
| LO frequency 4 | 19.25 GHz |
| LO stability | Ext Ref |
| LO type | EXT |
| noise figure max | 2.0 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Quad-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| output frequency band 3 | 950 - 1950 MHz |
| output frequency band 4 | 950 - 1950 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 13V / 22kHz Tone |
| control signal 3 | 18V / No Tone |
| control signal 4 | 18V / 22kHz Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 3.5 : 1 max. |
| output P1dB | + 10 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 1kHz offset max | Depends on External Reference |
| phase noise 10kHz offset max | Depends on External Reference |
| phase noise 100kHz offset max | Depends on External Reference |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | No Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 134 mm |
| product weight | 0.56 kg |
| product width | 67 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 17.20 - 18.20 GHz |
| input frequency band 2 | 18.20 - 19.20 GHz |
| input frequency band 3 | 19.20 - 20.20 GHz |
| input frequency band 4 | 20.20 - 21.20 GHz |
| LO frequency 1 | 16.25 GHz |
| LO frequency 2 | 17.25 GHz |
| LO frequency 3 | 18.25 GHz |
| LO frequency 4 | 19.25 GHz |
| LO stability | Ext Ref |
| LO type | EXT |
| noise figure max | 1.8 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Quad-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| output frequency band 3 | 950 - 1950 MHz |
| output frequency band 4 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 13V / 22kHz Tone |
| control signal 3 | 18V / No Tone |
| control signal 4 | 18V / 22kHz Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 1.3 : 1 max. |
| output P1dB | + 10 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 1kHz offset max | Depends on External Reference |
| phase noise 10kHz offset max | Depends on External Reference |
| phase noise 100kHz offset max | Depends on External Reference |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 156 mm |
| product weight | 0.56 kg |
| product width | 67 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| external ref freq | 10 MHz (sine-wave), - 5 to +5 dBm |
| input frequency band 1 | 17.20 - 18.20 GHz |
| input frequency band 2 | 18.20 - 19.20 GHz |
| input frequency band 3 | 19.20 - 20.20 GHz |
| input frequency band 4 | 20.20 - 21.20 GHz |
| LO frequency 1 | 16.25 GHz |
| LO frequency 2 | 17.25 GHz |
| LO frequency 3 | 18.25 GHz |
| LO frequency 4 | 19.25 GHz |
| LO stability | Ext Ref |
| LO type | EXT |
| noise figure max | 1.8 dB |
| noise figure typ | 1.5 dB |
| number of onboard LOs | Quad-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| output frequency band 3 | 950 - 1950 MHz |
| output frequency band 4 | 950 - 1950 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 13V / 22kHz Tone |
| control signal 3 | 18V / No Tone |
| control signal 4 | 18V / 22kHz Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 60 dB |
| Gain Flatness (over full band) | ≤ 4 dB p-p max. |
| input VSWR | 1.3 : 1 max. |
| output P1dB | + 10 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 1kHz offset max | Depends on External Reference |
| phase noise 10kHz offset max | Depends on External Reference |
| phase noise 100kHz offset max | Depends on External Reference |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +24V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| isolator | With Isolator |
| RF input connector | WR-42 waveguide grooved |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| temperature storage | -40 to +80°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 156 mm |
| product weight | 0.56 kg |
| product width | 67 mm |
Please contact us to request any additional documents you may need.
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8517690000 |
| Country of Origin | Made in the Republic of Korea |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | 145 x 95 x 65 mm |
| Unit Package Weight | 0.55 kg |
| Total Aluminium Content | 0.36 kg |
| Aluminum Country of Smelt and Cast | KR |
| Total Aluminium Value | $ 0.9 |


