| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 17.70 - 18.95 GHz |
| input frequency band 2 | 18.95 - 20.20 GHz |
| LO frequency 1 | 16.75 GHz |
| LO frequency 2 | 18.00 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.3 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 2200 MHz |
| output frequency band 2 | 950 - 2200 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | 5 dB p-p |
| image rejection | 40 dBc min. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | 5 dBm min. |
| output VSWR | 2.2 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +19V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-42 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 133 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 17.70 - 18.95 GHz |
| input frequency band 2 | 18.95 - 20.20 GHz |
| LO frequency 1 | 16.75 GHz |
| LO frequency 2 | 18.00 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.3 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 2200 MHz |
| output frequency band 2 | 950 - 2200 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | 5 dB p-p |
| image rejection | 40 dBc min. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | 5 dBm min. |
| output VSWR | 2.2 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +19V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-42 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 133 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 19.20 - 20.20 GHz |
| input frequency band 2 | 20.20 - 21.20 GHz |
| LO frequency 1 | 18.25 GHz |
| LO frequency 2 | 19.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.3 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | C |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | 4 dB p-p |
| image rejection | 40 dBc min. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | 5 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +19V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-42 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 133 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 19.20 - 20.20 GHz |
| input frequency band 2 | 20.20 - 21.20 GHz |
| LO frequency 1 | 18.25 GHz |
| LO frequency 2 | 19.25 GHz |
| LO stability | ±25 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.3 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | B |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | 4 dB p-p |
| image rejection | 40 dBc min. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | 5 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +19V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-42 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 133 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 17.70 - 18.95 GHz |
| input frequency band 2 | 18.95 - 20.20 GHz |
| LO frequency 1 | 16.75 GHz |
| LO frequency 2 | 18.00 GHz |
| LO stability | ±50 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.3 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 2200 MHz |
| output frequency band 2 | 950 - 2200 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | 5 dB p-p |
| image rejection | 40 dBc min. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | 5 dBm min. |
| output VSWR | 2.2 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +19V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-42 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 133 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 17.70 - 18.95 GHz |
| input frequency band 2 | 18.95 - 20.20 GHz |
| LO frequency 1 | 16.75 GHz |
| LO frequency 2 | 18.00 GHz |
| LO stability | ±50 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.3 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 2200 MHz |
| output frequency band 2 | 950 - 2200 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | 5 dB p-p |
| image rejection | 40 dBc min. |
| input VSWR | 2.5 : 1 max. |
| output P1dB | 5 dBm min. |
| output VSWR | 2.2 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +19V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-42 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 133 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 19.20 - 20.20 GHz |
| input frequency band 2 | 20.20 - 21.20 GHz |
| LO frequency 1 | 18.25 GHz |
| LO frequency 2 | 19.25 GHz |
| LO stability | ±50 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.3 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | 4 dB p-p |
| image rejection | 40 dBc min. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | 5 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +19V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | F-Connector |
| RF input connector | WR-42 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 133 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
| KEY SPECIFICATIONS | |
|---|---|
| band | Ka-Band |
| input frequency band 1 | 19.20 - 20.20 GHz |
| input frequency band 2 | 20.20 - 21.20 GHz |
| LO frequency 1 | 18.25 GHz |
| LO frequency 2 | 19.25 GHz |
| LO stability | ±50 kHz |
| LO type | PLL |
| noise figure max | 1.6 dB |
| noise figure typ | 1.3 dB |
| number of onboard LOs | Dual-Band |
| output frequency band 1 | 950 - 1950 MHz |
| output frequency band 2 | 950 - 1950 MHz |
| Product Revision | A |
| RF SPECIFICATIONS | |
|---|---|
| control signal 1 | 13V / No Tone |
| control signal 2 | 18V / No Tone |
| conversion gain max | 65 dB |
| conversion gain min | 55 dB |
| conversion gain typ | 58 dB |
| Gain Flatness (over full band) | 4 dB p-p |
| image rejection | 40 dBc min. |
| input VSWR | 2.2 : 1 max. |
| output P1dB | 5 dBm min. |
| output VSWR | 2.0 : 1 max. |
| phase noise 0.1kHz offset max | -60 dBc/Hz |
| phase noise 1kHz offset max | -70 dBc/Hz |
| phase noise 10kHz offset max | -80 dBc/Hz |
| phase noise 100kHz offset max | -90 dBc/Hz |
| spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| current consumption | 350 mA |
| power requirements | +12 to +19V DC |
| INTERFACE SPECIFICATIONS | |
|---|---|
| IF connector | N-Connector |
| RF input connector | WR-42 waveguide grooved |
| M and C SPECIFICATIONS | |
|---|---|
| led indicators | None |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| IP rating | IP 67 |
| temperature operational | -40°C to +60°C |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 39 mm |
| product length | 133 mm |
| product weight | 0.5 kg |
| product width | 70 mm |
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8517690000 |
| Country of Origin | Made in the Republic of Korea |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | EAR99 |
| Warranty | 3 years |
| Unit Package Dimensions | 190 x 100 x 70 mm |
| Unit Package Weight | - |
| Total Aluminium Content | 0.312 kg |
| Aluminum Country of Smelt and Cast | - |
| Total Aluminium Value | $ 0.78 |


