KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.0 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.0 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.0 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | TNC |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 1.5 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 1.5 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 1.5 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | TNC |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 30.0 - 31.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 30.0 - 31.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 30.0 - 31.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | TNC |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.25 - 3.75 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 27.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.25 - 3.75 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 27.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.25 - 3.75 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 27.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | Std Options and Std Specs |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 79 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | TNC |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.0 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.0 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.0 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | TNC |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 1.5 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 1.5 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 1.5 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 29.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | TNC |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 30.0 - 31.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 30.0 - 31.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.0 - 2.0 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 30.0 - 31.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | TNC |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.25 - 3.75 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 27.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | N |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.25 - 3.75 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 27.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | F |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
frequency sense | Non-Inverting |
input frequency band 1 | 1.25 - 3.75 GHz |
number of onboard LOs | Single Band |
output frequency band 1 | 27.5 - 30.0 GHz |
output power rated | 160W |
reference type | Internal High Stability |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
AM-PM conversion | < 2 Deg/dB @ Plin |
attenuator range | 30 dB variable in 0.1 dB steps |
gain flatness (54MHz) | 2 dB p-p max |
gain flatness (over full band) | 4 dB p-p max |
gain variation over temperature (open loop) | 4 dB p-p max |
gain variation over temperature (witg AGC) | 1 dB p-p max |
gain version | WGS Compatility Option |
input impedance | 50 Ohm |
input power detector range | -35 to 0 dBm |
input VSWR | 1.5 : 1 |
Level Stability with ALC | ± 0.5 dB |
output noise power density Tx | < -73 dBm/Hz |
output Plin | +49 dBm |
output Psat | +52 dBm |
output spurious in band | -60 dBc |
output spurious out of band | -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C |
output VSWR | 1.3 : 1 max |
small signal gain | 72 dB min |
ELECTRICAL SPECIFICATIONS | |
---|---|
current consumption Plin | 900 VA |
current consumption Psat | 1150 VA |
output power detector range | Rated power to -20 dB |
power reading accuracy | ± 1.0 dB max. |
power requirements | 100 to 240 VAC |
power supply | AC Powered |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | TNC |
M and C option | Cyber Hardened |
output interface | WR28 UG Cover with Groove |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
altitude | 10,000 ft (3,000 m) ASL |
humidity | 100% Condensing |
temperature operational | -40°C To +55°C |
PHYSICAL SPECIFICATIONS | |
---|---|
product height case 1 | 259 mm |
product length case 1 | 411 mm |
product weight | 20 kg |
product width case 1 | 254 mm |
Please contact us to request any additional documents you may need.
Please contact us to request any additional documents you may need.
INFORMATION | |
---|---|
HS Code | 8517620090 |
Country of Origin | Made in USA |
Ex Works | Richmond, BC, Canada |
ECCN Number | EAR99 |
Warranty | 3 years |
Unit Package Dimensions | 18.14 kg |
Unit Package Weight | - |