| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| customer interface | 1PPS In&Out Single Ended (standard) |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| customer interface | 1PPS In&Out Single Ended (standard) |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| customer interface | 1PPS in Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| customer interface | 1PPS in Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| customer interface | 1PPS out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| customer interface | 1PPS out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| customer interface | 1PPS in&out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| customer interface | 1PPS in&out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | TTL COM port |
| customer interface | 1PPS In&Out Single Ended (standard) |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | TTL COM port |
| customer interface | 1PPS In&Out Single Ended (standard) |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | TTL COM port |
| customer interface | 1PPS in Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | TTL COM port |
| customer interface | 1PPS in Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | TTL COM port |
| customer interface | 1PPS out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | TTL COM port |
| customer interface | 1PPS out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | TTL COM port |
| customer interface | 1PPS in&out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | TTL COM port |
| customer interface | 1PPS in&out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | Configuration continuing type |
| customer interface | 1PPS In&Out Single Ended (standard) |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | Configuration continuing type |
| customer interface | 1PPS In&Out Single Ended (standard) |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | Configuration continuing type |
| customer interface | 1PPS in Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | Configuration continuing type |
| customer interface | 1PPS in Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | Configuration continuing type |
| customer interface | 1PPS out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | Configuration continuing type |
| customer interface | 1PPS out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | Configuration continuing type |
| customer interface | 1PPS in&out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
| KEY SPECIFICATIONS | |
|---|---|
| digital tuning range | ±2E-8 |
| digital tuning resolution | 2.0e-11 |
| long term stability | <1E-10/month |
| output frequency 1 | 10 MHz |
| output frequency 2 | 1PPS |
| performance | Improved |
| sensitivity | Improved |
| short term stability | <3E-11@1s, <1E-11@10s, <5E-12@100s, <2E-12@1000s |
| time accuracy | 600ns/24hr (disciplined), 15ns RMS (disciplined to ext 1PPS) |
| unit type | Standard |
| RF SPECIFICATIONS | |
|---|---|
| phase noise floor | <-150 dBc/Hz |
| ELECTRICAL SPECIFICATIONS | |
|---|---|
| input voltage | 3.3 VDC ±0.1 |
| power consumption | <350 mW |
| warm up time | <130 sec |
| INTERFACE SPECIFICATIONS | |
|---|---|
| add-on | Configuration continuing type |
| customer interface | 1PPS in&out Diff RS422 |
| output signal format | 10MHz sine +12±2 dBm (50Ω), 1PPS TTL 3V |
| serial interface | RS232, LVTTL 3.3V, 9600-115200 baud |
| ENVIRONMENTAL SPECIFICATIONS | |
|---|---|
| humidity | 0–95% RH (MIL-STD-810F, Method 507.4) |
| MTBF | 250,000 hours (typical) |
| operating temperature | -40°C to +80°C |
| sensitivity value | ±3E-10 /g |
| shock | MIL-STD-202, Method 213 condition A |
| storage temperature | -55°C to +85°C |
| vibration | MIL-STD-810F, Method 514.5 Category 24 |
| PHYSICAL SPECIFICATIONS | |
|---|---|
| product height | 25.4 mm |
| product length | 77 mm |
| product weight | 0.295 kg |
| product width | 77 mm |
Please contact us to request any additional documents you may need.
Please contact us to request any additional documents you may need.
Please contact us to request any additional documents you may need.
| INFORMATION | |
|---|---|
| HS Code | 8543709650 |
| Country of Origin | Made in Israel |
| Ex Works | Richmond, BC, Canada |
| ECCN Number | - |
| Warranty | - |
| Unit Package Dimensions | 220 x 210 x 220 mm |
| Unit Package Weight | 1 kg |
| Total Aluminium Content | 0.11 kg |
| Aluminum Country of Smelt and Cast | IL |
| Total Aluminium Value | 0.275 |
|
|
|
|
|
|



