KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | M: Military |
input frequency band 1 | 1.0 - 2.0 GHz |
LO frequency 1 | 29.00 GHz |
output frequency band 1 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | C: Commercial |
input frequency band 1 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 1: Internal Fan |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & Ethernet |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | B |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | No Add-on |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | F: EMI/EMC Filter |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | P: Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
KEY SPECIFICATIONS | |
---|---|
band | Ka-Band |
band type | D: Dual Band |
input frequency band 1 | 950 - 1950 MHz |
input frequency band 2 | 950 - 1950 MHz |
LO frequency 1 | 28.05 GHz |
LO frequency 2 | 29.05 GHz |
output frequency band 1 | 29.00 - 30.00 GHz |
output frequency band 2 | 30.00 - 31.00 GHz |
output power rated | 25W |
Product Revision | A |
RF SPECIFICATIONS | |
---|---|
gain flatness (40MHz) | ≤ 1.0 dB p-p |
Gain Flatness (over full band) | ≤ 3.5 dB p-p |
Gain Flatness (over temperature) | ≤ 3.0 dB p-p |
input power | via power connector |
input VSWR | 2.5 : 1 max. |
Linear Gain | 60 dB typ., 55 dB min., 65 dB max. |
linear power plin | 41 dBm min. |
noise power density | -65 dBm/Hz in Tx, -156 dBm/Hz in Rx |
output power psat | 44 dBm min. |
output spurious in band | ≤ -55 dBc |
output spurious out of band P1dB | ≤ -60 dBc |
output VSWR | 1.9 : 1 max. |
phase noise 0.1kHz offset max | -62 dBc/Hz |
phase noise 1000kHz offset max | -102 dBc/Hz |
ELECTRICAL SPECIFICATIONS | |
---|---|
maximum current 20 VDC | 14.8A max. |
power connector | MIL-26482 Series 1 receptacle, Shell Size 12, 4 Pins, 58-533723-04P |
power consumption psat | 285 W max. |
power requirements | +20 to +56 V DC |
INTERFACE SPECIFICATIONS | |
---|---|
IF connector | SMA-Connector |
RF output connector | WR-28 waveguide grooved |
M and C SPECIFICATIONS | |
---|---|
mute control | Fully configurable, (mute enable: high: 3.0 - 5.0 V or low: 0.0 - 0.8 V, mute default: enabled or disabled) |
m and c connector | MIL-26482 Series 1 receptacle, Shell Size 12, 10 Pins, 58-533723-10P |
m and c interface | RS-485 & RS-232 |
ENVIRONMENTAL SPECIFICATIONS | |
---|---|
humidity | 100% condensing |
IP rating | IP 65 |
temperature operational | -40°C to +60°C |
temperature storage | -54 to +71°C |
thermal shutdown temperature | 90°C (Accuracy ± 3°C) |
PHYSICAL SPECIFICATIONS | |
---|---|
cooling | 2: External Baseplate |
enclosed accessories | Screws, Gasket, M&C Connector, Power Connector |
product height | 170 mm |
product length | 140 mm |
product weight | 2.4 kg |
product width | 80 mm |
ACCESSORIES | |
---|---|
optional configuration add ons | FP: EMI/EMC Filter & Surge Protection |
optional m and c cable 10m | CABLEM+C-AT10 |
optional power supply | PS480-AT1-(NA/UK/EU/IEC/CN/AU) |
-
ATOM-25W-Ka-Band-Baseplate-Fan-Cooled-EMI-Drawing.pdf
-
ATOM-25W-Ka-Band-Fan-Cooled-Drawing.pdf
-
ATOM-25W-Ka-Band-Fan-Cooled-EMI-Drawing.pdf
-
ATOM-25W-Ka-Band-Fan-Cooled-EMI-Isolation-Plate-Drawing.pdf
-
ATOM-25W-Ka-Band-Baseplate-Cooled-Drawing.pdf
-
3DModel-ATOM-25W-Ka-Baseplate-Cooled-with-EMI-Filter.zip
-
3DModel-ATOM-25W-Ka-Fan-Cooled-with-EMI-Filter-Vibration-Isolation-Plate.zip
-
3DModel-ATOM-25W-Ka-Fan-Cooled-with-EMI-Filter.zip
-
3DModel-ATOM-25W-Ka-Baseplate-Cooled.zip
INFORMATION | |
---|---|
HS Code | 8517690000 |
Country of Origin | Made in Canada |
Ex Works | Richmond, BC, Canada |
ECCN Number | EAR99 |
Warranty | 3 years |
Unit Package Dimensions | - |
Unit Package Weight | - |
Total Aluminium Content | 2.18 Kg |
Aluminum Country of Smelt and Cast | Made in Canada |
Total Aluminium Value | $ 5.45 |
![]() |
![]() |
![]() |